ATTO 2-Port 8Gb Fibre Channel to 8-Port 6Gb SAS/SATA Bridge

ATTO 2-Port 8Gb Fibre Channel to 8-Port 6Gb SAS/SATA Bridge

ATTO

  • R 130,016.00


Description

The Single Power Supply FibreBridge 6500 2-Port FC to SAS/SATA Controller from ATTO Technology is a performance tuned, manageable protocol translator which allows FC initiators to communicate with SAS/SATA target devices. The FiberBridge 6500 allows your SAS/SATA disk storage to integrate into a Fiber Channel SAN. This provides the benefit of increased availability and scalability while allowing the use of direct attached storage on a shared Fiber Channel network.

 Specifications

Form Factor 1U Rackmount, Dual power supply
Performance
Data Transfer Rate Up to 1200 Mb/s
Disk Device Support SAS/SATA: Up to 254
Air Flow 11 CFM [ambient air not to exceed 104°F (40°C)]
Connectivity
Input Connectors 2 x 8 Gb Fibre channel SFP
Output Connectors 2 x 6 Gb x 4 mini-SAS QSFP SFF-8436
Connectivity All connectors are on rear side of bridge
External LEDs for power, ready and alert status,Fibre Channel activity, link status and speed, and SAS link status
Statistic reporting for all bridge ports
Fibre Channel Connections 2 x 8 Gb SFP + Fibre channel connectors
Optical SFP + modules included
Auto negotiates to 8/4/2 Gb
Full support for FC-AL, FC-AL2, FC-FLA, FC-FS, FCP-3, FC-PLDA
Private loop, public loop, point-to-point, or fabric point-to-point with support for direct connection to F-port switches
Fibre channel retry logic for FLOGI and PLOGI
SAS Device Connectors Auto negotiates to 6/3/1.5 Gb
Supports passive and active copper
Supports SAS and SATA disk devices
Supports SAS tape devices
Supports up to 10 levels of SAS expanders
Management
Management Interfaces 10/100/1000 RJ-45 Ethernet port
Support for SNMP, SNTP, Telnet, FTP, ICMP
Management Tools User-friendly ExpressNAV storage manager provides remote configuration, management, and diagnostic capabilities
Local diagnostics supported via Command Line Interface (CLI), Telnet, and FTP
SCSI Enclosure Services (SES) monitor critical components to provide system feedback
Persistent event log gathers up to 40000 hardware, software, and network events to assist in overall system trouble-shooting
Retrieve event logs through the Ethernet port
Switchable dual firmware ROM images
Performance monitoring and error logging
Temperature monitoring
Phone home email notification of errors
Real Time Clock (RTC)
Audible alarm
Environmental Requirements
Bridge Operation Temperature: 41 to 104°F (5 to 40°C)
Humidity: 10 to 90% (non-condensing)
Bridge Storage Temperature: -40 to 157°F (-40 to 70°C)
Humidity: 10 to 95% (non-condensing)
Power Supply Input 85 to 264 VAC, 1 A, 47 to 63 Hz
General
Compatibility FCC Part 15 Class A, CE, VCCI, AS/NZS, CISPR 22, EN55022: 2006, Class A, EN55024, EN61000, CoC (South Africa)
Agency Approvals & Certifications EN 60950, CSA 60950, CB IEC 60950-1, UL 60950, IRAM, GOST-R, BSMI, C-TICK
Compliance RoHS 2002/95/EC
Dimensions (L x W x H) 9.90 x 17.31 x 1.69" (25.14 x 43.96 x 4.29 cm)
Weight 8.75 lb (3.97 kg)

We Also Recommend


Only 0 left in stock.